x6
8
Start up
C
D
• The blower shall be placed on a flat and clean surface.
• Set the two handle switches (
A
) in the On position (
I
).
• Press the primer bulb 6 times (
B
). Fuel shall be visible
inside the primer bulb. Otherwise, keep on pressing the
primer bulb until fuel can be seen inside the bulb.
• Move the starter choke lever (
C
) into the “| | Start”
position.
• Lightly pull the jack-line (
D
) until feeling resistance. Pull
quickly 3 or 4 times. Usually, the motor will not start in
this step.
• Move the starter choke lever into the “| | Run”
position. Pull the jack line one more time to start the
motor.
Start Up with a Cold Motor
• The blower shall be placed on a flat and clean surface.
• Set the two handle switches (
A
) in the On position (
I
).
• Set the starter choke into the “| | Run” position.
• Pull the jack-line until the motor starts.
Start Up with a Hot Motor
• Press any of the switches into the (
STOP
) position to
stop the motor.
Turning Off
B
A
ENGLISH
