Truper 12908 Manual Download Page 20

4

ENGLISH

General power tool

safety warnings

Keep your work area tidy and with good lighting.

Cluttered and dark areas can cause injuries.

Never use the mixer in explosive environments or 

where there are flammable liquids present.

Set the mixer 30 ft. away from the fuel filling up area
before starting the motor.

Keep children and passersby at a safe distance while 

the mixer is operating.

Distractions can make you loose control and
cause accidents.

Avoid making contact with power lines and circuits.

Find and avoid all power lines and circuits, especially
hidden wiring. Also keep away from grounded objects.

Stay always alert, be prudent and use common sense.

Even tough you are familiar with the use of the mixer do 
not get distracted while operating the machine. It can 
cause accidents.

Do not operate the mixer when tired or under the 

influence of drugs, alcohol or medication.

A moment of distraction while operating the mixer can 
cause severe personal injury.

Use the mixer with the guards and protector installed 

and in good repair.

Failure to comply with this warning leads to severe personal 
injury.

Never force the concrete mixer.

Working within the range designed assures a belter job 
and is safer.

Store the mixer is a safe place away from the reach of 

children.

Motor concrete mixers are dangerous near inexperienced 
hands.

Wear the right clothes.

Loose clothing, jewelry or long hair can get
tangled in the moving parts.

Keep your hands away from the rotating or moving 

parts.

Failure to comply with this warning leads to
severe personal injury.

Do not use the mixer in enclosed areas.

To prevent accumulation of carbon monoxide, an 
odorless toxic gas potentially deadly.

Use the right personal protection equipment.

Using eye protection, anti-dust masks, non-skid safety 
shoes, helmet, hearing protection and safety gloves 
considerably reduce the risk of injury.

Turn off the mixer before adjusting, changing 

accessories or storing.

Double-check the mixer motor switch is in the OFF position.

Never run the mixer if the switch is not working or is 

not duly assembled.

The operator is exposed to severe injury. Take it to repair 
immediately to a                              Authorized Service 
Center.

Do not overreach.

Good footing and balance give better control of the mixer in 
unexpected situations.

Prevent unintentional starting.

Double-check the mixer motor is OFF before
leaving or servicing.

Remove any vise fixed in the mixer before starting it.

Additional tools or wrenches fixed in a rotating part in 
the mixer can cause severe personal injury.

Service the mixer and double-check it is in the best 

conditions before starting it.

Check carefully the moving parts. See alignment and 
assembly. Do it periodically. Look for damaged elements 
or part that is not functioning correctly. Repair 
immediately in a                              Authorized Service 
Center.  

Accessories.

Use only accessories or spare parts indicated in this 
Manual o certified by                              .

Never leave the concrete mixer running and 

unattended.

To prevent severe accidents turn off the mixer after 
operating and before setting it in a safe place.

Never smoke near fuel.

Do not smoke near the area where fuel is being supplied 
or when operating the mixer.

CAUTION

CAUTION

WARNING

DANGER

DANGER

CAUTION

DANGER

DANGER

CAUTION

CAUTION

CAUTION

CAUTION

DANGER

DANGER

DANGER

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

Summary of Contents for 12908

































Reviews: