background image

5

• The pressure washer is equipped with a stop device that senses 

when the high-pressure gun trigger is released; opening an electrical 

circuit in the motor to stop the pressure washer.

                                 • In the event of a failure of the Automatic Stop, 

DO NOT USE the pressure washer. Contact a                                    

Authorized Service Center. Use of the pressure washer in this 

condition may damage it and/or cause personal injury.

To ensure the safety of the appliance, use only genuine 

manufacturer's or manufacturer's approved replacement parts.

   

          • High pressure nozzles, guards and couplers are 

important for the safety of the device. Use only nozzles, guards and 

couplers recommended by the manufacturer.

• Disconnect the power cord when the pressure washer is not in 

use and before removing the high-pressure hose.

                             • When the pressure washer is not in use and to 

prevent accidental discharge, the trigger lock should be attached to 

the high-pressure gun.

• Never knot or kink the high-pressure hose. Damage may result.

                             • Do not store this product in temperatures 

below 4 °C (40 °F). Freeze damage is not covered under warranty.

                             • Consider that pressure spray is very powerful 

and could be dangerous if misused. Not recommended for use on 

painted surfaces, wood surfaces or items glued with adhesive.

                                 • This appliance has been developed for use 

with a cleaning agent designed for use in pressure washers only. 

The use of other chemical cleaning agents or chemicals may 

seriously affect the safety of the appliance.

• Do not use bleach, chlorine bleach, chemicals or any other 

cleaners that contain acids or are not specific for pressure washers, 

otherwise serious damage may occur.

• The pressure washer is not waterproof; it should be located as far 

away as possible from the area to be washed.

• Consult a qualified electrician to ensure that the outlet where the 

pressure washer is plugged into is adequate, it is recommended 

that a power interrupting device be installed that is properly 

grounded to prevent shock. No more than 30 mA

                                 • To ensure the safety of the unit, use only 

genuine                                  brand replacement parts (nozzles, 

guards and couplers).

• Check all parts, components and accessories of the pressure 

washer for damage. If any damage is found, replace the part before 

using the pressure washer.

                                 • Do not use the appliance in the presence of 

other people, unless they are wearing protective clothing. 

• The jet must not be directed at any living being, live electrical 

equipment or the appliance itself.

• Do not allow children or inexperienced persons to operate the 

pressure washer.

                                 • An improper extension cord can be 

dangerous. If an extension cord is used, the plug and receptacle 

must have a waterproof construction.

• Do not use the appliance if the power cord or important parts of 

the appliance are damaged, e.g., safety devices, high pressure 

nozzles, trigger gun, etc.

                             • Water passing through the system is not 

potable.

                             • Unwind the pressure hose completely to avoid 

overheating.

Before operating the pressure washer

When operating the pressure washer

After operating the pressure washer

Automatic stop

                                 • Wear eye protection and heavy clothing.

• Always use both hands when spraying in order to have full control 

of the high-pressure gun.

                                 • Do not touch the nozzle or spray water while 

the pressure washer is operating.

• To allow the free air to circulate during operation, do not cover the 

pressure washer.

                                 • Never direct water spray into electrical wiring 

or into the pressure washer, it can cause a fatal electrical shock.

                                 • Do not discharge spray at people or animals. 

Only persons with proper protective equipment may be in the 

vicinity while operating the pressure washer. Do not point the water 

jet at yourself or others to clean clothing or footwear.

                                 • Keep all electrical connections dry and above 

the floor.

                            • Do not touch the contact with wet hands.

Safety Warnings for

Power Washers

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

DANGER

WARNING

WARNING

ENGLISH

incorrect operation of the pressure washer

correct way to operate the pressure washer

Summary of Contents for 101595

























Reviews: