Feed wheel
7
Mounting
A
B
D
F
• Screw the three handles (
A
) to the feed wheel (
B
).
Always use the tool with the feed wheel
properly mounted.
Safety guard
• Set the safety guard (
C
) using the included screws.
Cooling system
Never operate the magnetic drill
without using coolant, or when drilling horizontally, a
suitable cutting paste.
Do not try to modify or use any other
cooling system. Use only the coolant bottle and hose
provided.
• Using a hexagonal wrench, loosen the socket head
screw (
D
) on the side of the magnetic drill.
• Place the wider opening of the coolant bottle holder (
E
)
over the screw head and slide the holder down to secure
it in place.
• Insert the end of the coolant feed tube into the push
connector (
F
).
C
ENGLISH
CAUTION
WARNING
WARNING
