background image

5

ENGLISH

Safety Warnings for

Power Washers

• The washer is built with a shutdown device that detects 

when the high-pressure gun trigger is released. It opens a 

power circuit in the motor to stop the washer.

                         • If the Automatic Shutdown fails, DO 

NOT USE the washer.  Contact a                                    

Authorized Service Center.  Using the washer in these 

conditions may damage and / or cause sever personal 

injury.

   

    • Do not store equipment with pressure in 

the system. Remove the water supply and hold the trigger 

for a few seconds to release any residual pressure in the 

system when finished using it.

• Disconnect the power cable when the washer is not 

being used and before removing the high-pressure hose.

                        • To prevent an accidental discharge, set 

the trigger lock in the high-pressure gun when the washer 

is not being used.

• Never make knots or fold the high-pressure hose. It can 

get damaged.

                        • Do not use or store this product in 

temperatures below 40 °F.  The warranty does not cover 

damage caused by frost.

                        • Bear in mind that pressure spraying is 

very powerful and can be very dangerous if misused. It is 

not recommended to use on painted surfaces, wood 

surfaces or adhesive-pasted articles.

                          • This tool is built to use cleaning agents 

exclusively designed for washers. Using other cleaning 

agents or chemical products may seriously affect the 

device safety.

• Do not use bleach, chorine, chemical products or any 

other cleaning agent containing acid or that are not specific 

for washers. Otherwise the machine could get seriously 

damaged.

• The washer is not water proof. Set it as far away as 

possible from the place to be washed.

• Have a qualified electrician to double check if the power 

source where the washer is to be connected is the right 

one. To prevent electric shocks, install a device to 

disconnect the power supply or one that is grounded.

No more at 30 mA

                          • To guarantee the tool safety use only 

original                              brand spare parts, (nozzles, 

lance, gun & hose).

• Check that all the parts, components and accessories in 

the washer are not damaged. When finding any type of 

malfunction, replace the part before using the washer.

                          • Do not use the device in the presence 

of people unless they wear protective clothing. 

• The jet shall not be aimed directly towards any living 

being, active power equipment or the device.

• Do not allow children or unexperienced people to use 

the washer.

                          • Using a wrong extension cord can be 

dangerous. If using an extension cord, the plug and power 

inlet shall have the same construction against water entry.

• Do not use the machine if the power cord or important 

parts show any damage for example, safety devices, 

high-pressure nozzles, trigger, etc.

                        • The water passing through the system is 

not suitable to drink.

Before Operating the Washer

When Operating the Washer

After Operating the Washer

Automatic Shutdown

                        • Unroll the pressure hose all the way to 

prevent overheating.

                         • Wear eye protection and waterproof 

clothing.

• Use both hands when spraying to gain total control with 

the high-pressure gun.

                          • Never touch the nozzle or the water 

spray while the washer is being operated.

• Do not cover the washer when being used to allow free 

air circulation.

                          • Never aim the water spray towards the 

power cord or the washer. It may cause a fatal electric shock.

                         • Never discharge spray directly to people 

or animals. Only people wearing the protection gear may 

be close to the washer when being used. Do not aim the 

water jet towards yourself or other people to clean clothes 

or shoes.

                          • Keep all power connections dry and 

above the ground.

                       • Do not touch the power plug with wet 

hands.

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

DANGER

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

Wrong Ways to Operate the Washer 

Right Way to Operate the Washer 

Summary of Contents for 102111





























Reviews: