1
Adjusting screw (2x)
2
Stripper
3
Roller holder
4
Screws (M12)
5
Spacer
Fig. 54706
1. Undo and remove both of the screws on the stripper (2)
using the screwdriver provided.
2. Screw on the special stripper for the pipe and tube process-
ing (order number 0023242).
3. Palce the spacer (5) and roller holder (3) on top of each
other and fasten them to the machine using the screw (4).
4. Set the material thickness on a level sheet using the spindle.
5. Position the machine on the tube.
6. Use the adjusting screw (1) to align both rollers to the radius
of the tube.
Special tool for pipe and tube processing
The special tool below can be used for pipe and tube process-
ing for bevelling tubes with an inside diameter of 30-120 mm.
The wall thickness of the tubes must not exceed 11 mm for this
process.
E681en_02
Options
21
Installing the roller holder
