Cutting tool
Standard
High-tensile
Aluminum
High-tensile
5575
Heavy-duty cut-
ting tool
Regrinding
reserve
10mm
10 mm
10 mm
10 mm
2 mm
Cutting tool for TruTool TKF 1500 beveler (1A1), (1B1)
Tab. 7
Note
Optimum utilzation of the high-performance cutting tool is
ensured only with the machine in the 2-gear version.
3.5
Adjusting height of the cutting tool
1
Cutting tool
7
Clamping screw
15 Eccentric shaft
20 Carrier
22 Sliding sleeve
28 Pressure die
Fig. 13094
Adjust the height of the cutting tool in such a way that it pro-
trudes approximately 1 mm (min. 0, max. 3 mm) out of the slid-
ing sleeve (22).
1. Rotate the eccentric shaft (15) until the cutting tool (1) has
achieved its highest point (UDP = upper dead point).
2. Undo the clamping screw (7).
E681en_02
Selecting cutting tool
15
