Trumpf TruTool N 200, Operator'S Manual

Page: 8 / 20

8
Description
E609EN_01.DOC
2.2 Technical data of the TruTool N 200
Other countries USA
Value Value
Max. material thickness:
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminum 250 N/mm²
2.0 mm
1.5 mm
1.0 mm
2.5 mm
0.079 in
0.06 in
0.039 in
0.1 in
Working speed 1.3 m/min 4.2 ft/min
Nominal power consumption 600 W 600 W
Idle stroke rate 1600/min 1600/min
Stroke rate with nominal load 1300/min 1300/min
Weight 1.9 kg 4.2 lbs
Start hole diameter 16 mm 0.63 in
Smallest radius with curved cuts 4 mm 0.16 in
Max. operating pressure
(flow pressure) 6.2 bar 90 psi
Air consumption at 6 bar 0.8 m³/min 28.3 cubic ft/min
Connecting thread 1/4" 1/4"
Inside diameter of the compressed
air hose 10 mm 0.4 in (3/8")
Technical data
Vibration Specifications in accordance with
EN 12096
Measured values in accordance
with EN ISO 8662-10
Vibration value at the handle a 13.3 m/s²
Uncertainty K 4.6 m/s²
Measured values were measured while cutting sheet steel
400 N/mm² with max. material thickness.
Table 1
Table 2