Components
Standard punch
Punch for high-ten-
sile steels
Area of application
Suitable for machining
materials up to 400 N/
mm
2
e. g. aluminum,
mild steel.
Suitable for machining
materials over 400 N/
mm
2
e. g. stainless
steel.
Order number
112900
120344
Aluminum 250 N/mm
2
X
-
Mild steel 400 N/mm
2
X
-
Stainless steel 600 N/
mm
2
-
X
Stainless steel 800 N/
mm
2
-
X
Tab. 5
3.3
Select gear
Note
Depending on the material thickness, tensile strength and type of
workpiece, a different gear must be selected for machining.
Instead of in 2nd gear, 1st gear can always be worked with, but
never vice versa.
Damage to property due to turning the gear switch during
operation.
Damage to the gearbox can be a consequence.
Ø
Use the gear switch only when the motor is running down or
at rest.
Damage to property due to too high a stroke rate
Damage to the motor due to an overload can be a
consequence.
Ø
Observe the specifications in the technical data
(see "Tech-
nical data", pg. 6)
.
E232en_06
Select punch
11
CAUTION
CAUTION
