E607EN_01.DOC
Maintenance
17
5.2 Supplying with power and
guaranteeing lubrication
Caution
Damage to property due to improper handling!
Failure of the compressed air motor.
¾
Do not exceed the maximum operating pressure.
¾
Regularly lubricate the compressed air motor. Install an oil
mist lubrication device into the compressed air line.
Condition
•
The pressure regulating valve and the connecting threads are
laid out correctly (see "Technical data", section 2.2, p. 7).
1
Connecting thread 1/4"
2
Oil mist lubrication device
3
Pressure regulating valve
4
Filter and water separator
5
Inside diameter of the
compressed air hose
min. 10 mm or 3/8"
Compressed air supply
1. Install the filter and water separator (4).
2. Drain/check the water separator daily.
Note
To ensure a supply of compressed air the tube cross-sections in
the entire line system must be twice to three times the size of the
inside diameter of the compressed air hose.
Supplying compressed air
Fig. 52385
Summary of Contents for TruTool F 301
Page 1: ...Operator s manual English TruTool F 301 1A2...
Page 2: ......