Trumpf N700-1, Operator'S Manual

Page: 11 / 12

9
GB
N 700 - 1 E211en1_2.doc
Wearing parts
N700 Order No.
Punch 104589
Punch for high-tensile sheets 104590
Die for 3-5 mm (die type 5) 098723
Die for 5-7 mm (die type 7) 098722
Die for profile sheet 5-7 mm (die type P7) 098721
Wearing plate 119173
Original accessories
Accessories delivered with the machine
Description Order no.
Tool set (punch and die, installed)
Quick-release coupling (machine part) 114094
Quick-release coupling (hose part) 114095
Handle 103555
Allan key DIN 911-12 067920
Allan key 118860
Allan key DIN 911-5 067857
2 cheesehead screws M14x45
to fasten the handle
DIN 912 105083
Tube of lubricating grease "S1" 121486
Operating manual 128631
Safety instructions (red print) 125699
Optional
Chip bag 109275
Punching and nibbling oil for steel (0.5l) 103387
Punching and nibbling oil for aluminium (1l) 125874
Case 121585
Suspension bracket 105001
Muffler for motor, complete 114244
Ordering spare parts and wearing
parts
To avoid delays and wrong deliveries, please proceed
as follows when ordering replacement parts:
•
When ordering spare parts or wearing parts,
please use the TRUMPF stock number of the
respective part.
•
Other information required with an order:
-
for electrical parts: voltage
-
required quantity
-
machine type
•
Information required for shipping:
-
your exact address
-
desired mode of shipment (e.g. air mail,
express mail, ordinary freight, parcel post,
etc.)
•
Send your order to your TRUMPF representative.
You will find a list of TRUMPF
representatives at the back of this
operating manual.
Notes on documentation
The document was written by the Technical
Documentation department of
TRUMPF
Werkzeugmaschinen GmbH + Co.
KG.
All rights reserved, particularly those concerning the
duplication, distribution and translation of this
documentation, even in the event of property right
registration.

TRUMPF Werkzeugmaschinen GmbH + Co. KG