Trumpf 1B5, Original Instructions Manual

Page: 22 / 184

22
12 Drill chuck
13 Adjustment ring, torque
14
Handle
Only with TruTool HD 1813 (1B5).
3. Operation
WARNING
Risk of injury from unintentional
actuation of the On/Off switch.
» Remove the rechargeable battery from
the machine before carrying out any
work on the machine!
3.1 Switching on/off
RPMs are infinitely adjustable depending
on the pressure on the On/Off switch.
Switching on
» See Figure 12
Switching off
» See Figure 13
3.2 Changing the rechargeable
battery
The rechargeable battery can be used
immediately upon delivery and can be
charged at any time.
Removing the rechargeable battery
» See Figure 14
Inserting the rechargeable battery
» See Figure 15
3.3 Rechargeable battery charge
status display
When the On/Off switch is actuated,
the rechargeable battery charge status
display shows the rechargeable battery
charge level.
» See Figure 16
3.4 Charging the rechargeable
battery
Only use the rechargers recommended by
TRUMPF for charging the rechargeable
batteries.
Observe the information in
the operating instructions for
the recharger used.
3.5 Changing tools
» See Figure 17
3.6 Mounting the handle
TruTool HD 1813 (1B5) only.
» See Figures 18a and 18b
4. Adjustments
WARNING
Risk of injury
» Make all settings only when the
machine is switched off!
4.1 Changing the direction of rotation
Clockwise
» See Figure 3
Counterclockwise
» See Figure 4
4.2 Changing gears
NOTE
Damage to the device due to incorrect
gear setting.
» Only select the gear when the motor is
stopped.
Gear 1 (Lo) = Low speed range
» See Figure 5
Gear 2 (Hi) = High speed range
» See Figure 6
BA_Bohrschrauber 18 V_2017.indb 22 11.01.2018 13:18:46