18
1. Safety
1.1 General safety information
Read all safety information and
instructions.
Failing to observe the safety information
and instructions can lead to electrical
shock, burns and/or severe injuries.
Keep all safety information and
instructions for future reference.
Read the document completely before
using the device. Read the attached
brochure "General safety instructions".
Do not put the device into operation until
you have understood the instructions
and safety instructions contained in it. If
you have any questions, please contact
TRUMPF Customer Service.
All documents form part of the cordless
screwdriver. The documents must also be
passed on when the device is transferred
to a new owner.
1.2 Warning notices in these
operating instructions
Warning notices in these operating
instructions follow a uniform structure.
They are introduced by a signal word that
indicates the degree of danger. They are
followed by the source of the danger and
measures to avoid it.
WARNING
This combination of symbol and signal word
indicates a potentially dangerous situation
that may result in death or serious injury if not
avoided.
NOTE
This information is used to indicate dangerous
situations that could result in possible damage
to the product or environmental pollution.
1.3 Special safety instructions
»
Wear hearing protection when
hammer drilling
. Noise exposure can
cause hearing loss.
»
Use the additional handles supplied
with the unit.
Losing control of the tool
may lead to injury.
»
Grasp the device by the insulated
holding surfaces when performing
work during which the inserted tool
may contact hidden power lines or
its own power cord.
Contact with an
electrified power line may also electrify
the metal parts of the tool and lead to
electric shock.
»
Pay attention for hidden electric lines
as well as gas and water pipes.
Use
a metal detecting instrument before
beginning work to ensure that you will
not run into these pipes.
»
Grasp the power tool securely.
Brief
reaction torque may occur.
»
Do not touch the rotating tool.
»
Do not remove chips until the
machine has come to a standstill.
»
Secure the work piece sufficiently.
Use clamps or a vice to secure your
work piece.
»
Move the rotation selection switch
to the center position to avoid
unintentional actuation during
maintenance or transport.
»
Switch off the power tool
immediately if the inserted tool
is blocked. Be prepared for high
reaction torques causing kickback.
The inserted tool will blocks if:
-
the power tool is overloaded or
-
it is tilted in the workpiece to be
machined.
Dealing with dusty conditions
Inhaling or touching dust from
materials such as lead-based paints,
some types of wood, metals, or
minerals containing asbestos can
cause allergic reactions, respiratory
BA_Bohrschrauber 18 V_2017.indb 18
11.01.2018 13:18:45
Summary of Contents for 1B5
