Truma UGE 10, Operating Instructions & Installation Instructions

Page: 6 / 16

The electrical heating element is equipped with an over-
temperature sensor. In the event of a fault, switch off at
the operating element. Check water content, refill if required
(close drain valve). Wait 10 minutes, then switch on again.
Maintenance
We recommend to use twice a year the Truma system care
set for cleaning, disinfecting and looking after the boiler. Other
products – in particular products containing chlorine – are
unsuitable.
To avoid infestation by micro-organisms, the water content
must be heated to 70 °C at regular intervals.
Clean the device and the ventilation slits with a dry and fluff-
free cloth.
Fuses
The water heater 12 V fuse is on the electronic control unit on
the water heater.
1.6 A
Only replace the miniature Fuse on the p.c.b. with a fuse
of the same type: 1.6 A, EN 60127-2-3 (slow action).
If there is a defect in the electronics, return the control p.c.b.
well padded. If you fail to pack it correctly the guarantee shall
no longer be valid.
Only use original Truma Ultrastore control p.c.b.'s as spare parts!
Disposal
The device must be disposed of in line with the administrative
regulations of the respective country in which it is used.
National regulations and laws (in Germany, for example, the
End-of-life Vehicle Regulation) must be observed.
Technical data
Determined in accordance with EN 15033 or
Truma test conditions.
Manufacturer
Truma Gerätetechnik GmbH & Co. KG
P.O. Box 1252
85637 Putzbrunn (Munich)
Germany
Water contents
10 litres
Pump pressure
max. 2.8 bar
System pressure
max. 4.5 bar
Type of gas
Liquid gas (propane / butane)
Operating pressure
30 mbar
Rated thermal output
1500 W
Gas consumption
120 g/h
Heating up time from approx. 15 °C to approx. 70 °C
Rapid GE – 10 litres
Gas operation:
approx. 31 min.
Electrical operation: approx. 29 min.
Gas and electrical operation: approx. 16 min.
Power consumption 12 V
Ignition: 0.17 A
Heating up: 0.08 A
Standby:
0.04 A
Power consumption 230 V
Heating up: (3.7 A) 850 W / (5.7 A) 1300 W
Stand-by Consumption Gas
approx. 70 W
Weight (empty)
approx. 7.2 kg
The right to effect technical modifications is reserved!
Dimensions
245
129
261
168
47
30
132
25
349
347
383
92
water
connections
gas connection electronic
cut out
cowl
cut out
All dimensions in mm.
6