background image

3

Protection against an electrical shock 

Only operate devices whose casings and cables are undam-
aged. Ensure the cables are installed safely. Do not pull on 
the cables.

Use

Do not use electrical devices for purposes other than those 
stated by the manufacturer.

Repairs

Do not repair or modify the device. Please contact your dealer 
or the Truma Service (see service manual or www.truma.com).

Accessories

Only use accessories and additional devices that are supplied 
or recommended by the manufacturer.

Intended use

The CP 25-UK is a digital operating / display and control unit 
for the Combi 4 E / 6 E. 

The device is designed to be installed in caravans and 
motorcaravans. 

Initial operation or activation after a power cut 

After the operating voltage has been connected, the unit will 
beep and the display remains dark. To switch on, press the 
key 

 and the main screen will appear.

Function description

More details regarding the operating modes you will find 
in the operating instruction of your Combi.

Main screen

Status of 
the heater

Display 
timer mode

Room temperature

Clock

10:10

Room temperature: Display on when the heater is active
Timer: 

Display on when the timer is active

Clock: 

Only if the clock has been set, otherwise 
the Truma logo will appear in the display

Status of the heater:
H:  

Set room temperature (e.g. 18 °C)

EG: 

Energy selection (E = Electro, G = Gas)

W: 

Set water temperature

Summary of Contents for CP 25-UK













Reviews: