57
Installazione del sezionatore della batteria e
collegamento della batteria
Installare il sezionatore in un punto adatto (vicino alla batteria)
del cavo positivo tra batteria e comando.
Per l’installazione è necessario un foro del Ø di 25 mm.
Girare la chiave in senso antiorario fino alla posizione finale
e togliere.
Inserire il sezionatore nel foro e fissare con viti adatte al re-
lativo fondo.
Spelare il cavo positivo della batteria e applicare capocorda
(non compresi nel set) sulle due estremità del cavo spelato.
Reinserire la chiave e posizionare su «OFF». Avvitare i cavi
con i capocorda sul sezionatore. Sequenza del collegamen-
to: capocorda, rosetta elastica, dado.
–
–
–
–
–
Allacciamento alla rete
Il collegamento della rete di alimentazione dell‘apparecchio
deve essere effettuato in conformità alle rispettive disposizio-
ne d‘installazione nazionali in vigore.
Il collegamento elettrico a 230 V deve essere eseguito
esclusivamente da un tecnico qualificato (in Germania, ad
es., secondo la direttiva VDE 0100, parte 721 o la norma
IEC 60364-7-721). Le istruzioni qui riportate non sono state
concepite per invogliare persone non qualificate ad effettuare
il collegamento elettrico, esse forniscono solo informazioni
supplementari allo specialista incaricato!
Collegare il cavo di rete alla rete di distribuzione del caravan,
motocaravan o imbarcazione. Cavo verde / giallo a terra di
protezione!
Controllare la corretta posizione dei collegamenti.
Creare il collegamento alla rete mediante la spina del dispo-
sitivo di raffreddamento con il cavo di rete 230 V.
–
–