8
Declaration of conformity
1. Information about the manufacturer
Name: Truma Gerätetechnik GmbH & Co. KG
Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Device identification
Type/Model:
Aventa comfort
air conditioning unit
3. Meets the requirements of the following EC Directives
3.1 Electromagnetic Compatibility 2004/108/EC
3.2 Low Voltage Directive 2006/95/EC
3.3 Radio Interference in Vehicles 72/245/EEC
(with the supplements)
3.4 End-Of-Life Vehicle Directive 2000/53/EC
and bears type approval numbers E24 10R-030696 and
the CE symbol.
4. Basis of the conformity assessment
EN55014-1; EN61000-3-2; EN61000-3-3; EN62233;
EN55014-2; IEC / EN60335-1; IEC / EN60335-2-40;
2009/19/EC; DIN EN378-2
5. Information and the function of the signatory
Signature: Dr. Schmoll
Managing Director / Engineering
Putzbrunn, 18/02/2011
Clearance around the air conditioning system
The clearances around the external unit must be 20 mm at the
front, 100 mm to the side and as far as possible and not less
than 200 mm to the rear.
10 0
660
10
0
100
8
200
20
The clearance around the
air distributor
must ensure that air
can escape unrestricted. There must be a clearance of at least
40 mm to the side. The swivel range of flaps and doors must
be taken into account.
400
670
380
78
523
400
35
0
40
40
46
Air inlets / Air outlets
Condensation traps
The condensation is led away over the roof of the vehicle.
The right to effect technical modifications is reserved!
