Trueshopping BC1E34F, Owner'S Manual

Page: 8 / 17

1. Perform the maintenance and checking operations described in this manual at regular intervals. If any
parts must be replaced or any maintenance or repair work not described in this manual must be
performed please contact a representative from the store or your nearest authorized servicing dealer
for assistance.
2. Under no circumstances should you ever take apart the brush cutter or alter it in any way. Doing so
might result in the brush cutter becoming damaged during operation or may prevent the brush cutter
operating properly.
3. Always be sure to turn off the engine before performing any maintenance or checking procedures.
4. When sharpening, removing or reattaching the blade, use proper tools and equipment to prevent
injury.
5. When replacing the blade or any other parts or
when replacing the oil or any lubricants, always be
sure to use only products which have been certified
for use with the brush cutter.
5. SET UP
 ENGINE AND MAIN PIPE
Align the hanger and the fuel tank, using attached
4 socket screws.
Secure the connection firmly with equal force.
(F1)
(1) Fuel tank
(2) Bolt
(3) Main pipe
 HANDLE
1. Loosen the 4 bolts on the handle bracket.(F2)
2. Insert the right handle (throttle lever is attached) and the
left handle assembly into the bracket and retighten the bolts
securely. (F2)
(1) Handle bracket
(2) Right handle
 SAFETY GUARD
Attach the safety guard to the gear case and fix it with the
clamp and 3 bolts (M5x25) securely. (F3)
(1) Bolt
Owner manual 8