Trueshopping BC1E34F, Owner'S Manual

Page: 11 / 17

 STARTING THE ENGINE

Before starting the engine, inspect the entire unit for loose fittings, fuel leaks, and that the
cutting attachment is properly installed and securely fastened.

Place the unit an a flat, firm surface. Keep the cutting
head clear of everything around i
t.
1. Turn the cap to the fuel tank to make sure that it is fixed on
tightly. (F8)
(1) Cap
(2) Fuel tank
2.Open the fuel tank cock. (F9)
3. Move the choke lever to the closed position.
（ F9 ）
（ 1 ） Choke lever
（ 2 ） Fuel cock
（ 3 ） Close
（ 4 ） Open
（ 5 ） Close
（ 6 ） Open
NOTE
When restarting immediately after stopping the engine, move the choke
lever to the open position.
4. Set the throttle lever to the starting position. (F10)
（ 1 ） Idling
(2) Starting (1/3-1/2 open)
(3) Full throttle
When restarting immediately after stopping the engine, move the
throttle lever to the idling position.
5. While holding the unit firmly. Pull out the starter rope quickly. （ F11 ）
6. After the engine has started, open the choke gradually.
7. Allow the engine to run for 2 to 3 minutes to warm up.
 STOPPING THE ENGINE
1. Return the throttle lever to the idling position.
2. Push the engine switch button.
Owner manual
WARNING
NOTE
11