TCO85 Convection Oven Manual
Page 8
Revision: 13 Jan 11
:OPERATOR MANUAL TCO85 130111
SPECIFICATIONS
INSTALLATION
THIS EQUIPMENT MUST BE INSTALLED AND OPERATED IN
ACCORDANCE WITH LOCAL AUTHORITY, ELECTRICITY,
ANY APPLICABLE STATUTORY REGULATIONS AND
MANUFACTURER REQUIREMENTS.
NOTE: INSTALLATION AND OPERATION IS THE RESPONSIBILITY OF
THE OWNER
Electrical Requirements:
230-240 Volt, 50Hz, 15 Amps
Connection:
Refer data plate on rear panel
240
Volts
AC
3 kW
50Hz
13.5
Amps
Flexible lead and 15A plug are supplied and fitted.
All units are tested at the factory as part of final inspection.
Data Plate:
The data plate is located on the rear panel.
Installation Clearances:
The
MINIMUM
clearances from combustible
surfaces are:
Sides: 300mm
Rear: 100mm
Top: No items are to be placed on the top of
the oven.
The Vent must never be covered.
Adequate clearance and access must also be
provided for service.
Summary of Contents for TCO85
Page 23: ...TCO85 Convection Oven Manual Page 23 Revision 13 Jan 11 OPERATOR MANUAL TCO85 130111...
Page 24: ...TCO85 Convection Oven Manual Page 24 Revision 13 Jan 11 OPERATOR MANUAL TCO85 130111...
Page 25: ...TCO85 Convection Oven Manual Page 25 Revision 13 Jan 11 OPERATOR MANUAL TCO85 130111...
Page 27: ...TCO85 Convection Oven Manual Page 27 Revision 13 Jan 11 OPERATOR MANUAL TCO85 130111...
