True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com
Page # 16 of 30
CHAPTER 2: ASSEMBLY GUIDE
Strength
XFW6800
ASSEMBLY STEPS:
Step 3A (Lift Bar Assembly):
Holding the lift bar assembly in place on the
guide rods, position the clamping collars
onto the upper ends of both guide rods and
insert the guide rods into the upper guide rod
main frame holes. Slide the clamping collars
up into position as shown below and secure
in place using the attached set screws.
Note: Ensure both guide rods are inserted
into the upper guide rod main frame holes at
the same time.
Item Part Number
Description
Quantity
1
D-840A
CLAMPING SHAFT
COLLAR, 1”
2
