True XFW6800, Owner'S Manual

Page: 15 / 30

True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com
Page # 15 of 30
CHAPTER 2: ASSEMBLY GUIDE
Strength
XFW6800
ASSEMBLY STEPS:
Step 2 (Guide Rods):
Insert both guide rod brackets into the
upper guide rod main frame holes.
With the guide rods in the horizontal
position on the ground, slide the safety
stops, flat washers, weight stack bumpers,
and lift bar assembly onto the guide rods in
the order shown below.
Note: Apply a thin layer of a Teflon©
(PTFE) grease on a weekly basis to
the guide rods. TRUE recommends
Magnalube© brand.
Item Part Number Description Quantity
1 XFW68-BAR-00X LIFT BAR ASSEMBLY 1
2 XFW68-ROD-01 GUIDE ROD 63.5mm X
25.5mm X 4mm
2
3 XFW68-STP-00X SAFETY STOP RIGHT SIDE 1
4 XFW68-STP-10X SAFETY STOP LEFT SIDE 1
5 XFW68-BKT-01 GUIDED ROD BRACKET 2
6 B 683 BUMPER, WEIGHT STACK,
3/4” TALL
3
7 D 840A CLAMPING SHAFT
COLLAR
2
8 C1110 FLAT WASHER 1” I.D x 2.5”
O.D X .165” THICK
2