STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
TDD-4CT-S TFSY03E
TFSY01S
TFSY03P
TFSY033
Direct Draw Beer Dispenser:
Solid Door
Stainless Steel Exterior
Club Top
TDD-4CT-S
DESIGN
• True’s direct draw beer dispensers are
designed with enduring quality and
value. Our commitment to using the
highest quality materials and oversized
refrigeration assures colder product
temperatures and years of trouble free
service.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 33°F to 38°F (.5°C to
3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger
fan blades give True beer dispensers
a more effi cient low velocity, high
volume airfl ow design. This unique
design ensures faster temperature pull
down of warm product, colder holding
temperatures and faster recovery in high
use situations.
• Condensing unit accessed from behind
front grill, slides out for easy cleaning
and maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel doors, front and
sides. Matching aluminum back. All
stainless steel counter top and lid.
• Interior - 300 series stainless steel fl oor
with
1
/
2
" (13 mm) reinforced lip and
heavy gauge galvanized steel walls.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
• Welded, heavy duty galvanized base rail
dipped in rust inhibiting enamel paint
for corrosion protection inside and out.
• Two (2) 3" (77 mm) diameter stainless
steel insulated beer columns. Cold air
is directed into beer columns to reduce
foaming and maximize draft beer
profi ts.
• Anodized aluminum glass rail.
DOORS
• Stainless steel exterior with heavy gauge
galvanized steel liner.
• Each door fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to ensure
permanent attachment.
• Positive seal doors
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
• Door locks standard.
SHELVING
• One (1) adjustable, heavy duty, black,
PVC coated wire shelves 11
3
/
8
"L x
21
1
/
4
"D (289 mm x 540 mm). Four (4)
chrome plated shelf clips included per
shelf.
• Aluminum shelf support pilasters.
Shelves are adjustable on
1
/
2
" (13 mm)
increments.
LIGHTING
• Incandescent interior lighting.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• Convenient
1
/
2
" (13 mm) barbed T drain
fi tting located on front of cooler.
• Designed to accommodate a variety of
beer kegs.
• Listed under NSF-7 for the storage
and/or display of packaged or bottled
product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
230 - 240V / 50 Hz.
❒
6" (153 mm) standard legs.
❒
6" (153 mm) seismic/fl anged legs.
❒
2
1
/
2
" (64 mm) castors (set of 6).
❒
4" (102 mm) castors (set of 6).
❒
Double headed draft column.
❒
Two-way tapper manifold.
❒
Three-way tapper manifold.
❒
Draft cap.
❒
Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant), consult
factory technical service department for
BTU information.
115/60/1
NEMA-5-15R
ELEVATION
PLAN VIEW
15
1
/
4
"
(388 mm)
88
1
/
2
"
(2294 mm)
52
1
/
4
"
(1328 mm)
3"
(77 mm)
13"
(331 mm)
48
29
/
32
"
(1243 mm)
27
1
/
16
"
(688 mm)
21
25
/
32
"
(554 mm)
TOP VIEW
1
/
2
"(13 mm)
Barbed T
Drain Fitting
23
1
/
16
"
(586 mm)
11
7
/
32
"
(285 mm)
12
3
/
4
"
(324 mm)
3
7
/
8
"
99 mm
38
1
/
2
"
(978 mm)
48
27
/
32
"
(1241 mm)
90
5
/
16
"
(2294 mm)
52
13
/
32
"
(1332 mm)
3
/
16
"
5 mm
37"
(940 mm)
17
19
/
32
"
(456 mm)
1
1
/
2
"
(38 mm)
