STANDARD FEATURES
Model:
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
TDD-4 TFHY04E
TFHY04S
TFHY04P
TFHY043
Direct Draw Beer Dispenser:
Solid Door
TDD-4
DESIGN
• True’s direct draw beer dispensers
are designed with enduring quality
and value. Our commitment to using
the highest quality materials and
oversized refrigeration assures colder
product temperatures and years of
trouble free service.
REFRIGERATION SYSTEM
• Factory engineered self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True merchandisers a more
effi cient low velocity, high volume
airfl ow design. This unique design
ensures faster temperature pull down
of warm product, colder holding
temperatures and faster recovery in
high use situations.
• Condensing unit accessed from behind
front grill, slides out for easy cleaning
and maintenance.
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
CABINET CONSTRUCTION
• Exterior - heavy duty, wear resistant
laminated black vinyl front and sides.
Matching black aluminum back. All
stainless steel counter top.
• Interior - 300 series stainless steel fl oor
with
1
/
2
" (13 mm) reinforced lip and
heavy gauge galvanized steel walls.
NSF approved for pre-packaged and
bottled product.
• Insulation - entire cabinet structure
foamed-in-place using high density,
CFC free, polyurethane insulation.
• Welded, heavy duty galvanized base
rail dipped in rust inhibiting enamel
paint for corrosion protection inside
and out.
• 3
"
(77 mm) diameter stainless steel
insulated beer columns. Cold air
is directed into beer columns to
reduce foaming and maximize
draft beer profi ts.
DOORS
• Wear-resistant laminated black vinyl
exterior with heavy gauge galvanized
steel liner.
• Each door fi tted with 12" (305 mm)
long recessed handle that is foamed-
in-place with a sheet metal interlock
to insure permanent attachment.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
• Door locks standard.
MODEL FEATURES
• Designed to accommodate a variety
of beer kegs.
• Convenient
1
/
2
" (13 mm) barbed
T drain fi tting located on front of
cooler.
• Listed under NSF-7 for the storage
and/or display of packaged or bottled
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for fi nal connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
230 - 240V / 50 Hz.
❒
Double headed draft column.
❒
Two-way manifold.
❒
Three-way manifold.
❒
Draft cap.
❒
Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
ELEVATION
PLAN VIEW
TOP VIEW
15
1
/
4
"
(388 mm)
52
13
/
32
"
(1332 mm)
37"
(940 mm)
3"
(77 mm)
13"
(331 mm)
38
21
/
32
"
(982 mm)
27
1
/
16
"
(688 mm)
21
25
/
32
"
(554 mm)
1
/
2
"(13 mm)
Barbed T
3
7
/
8
"
99 mm
90
5
/
16
"
(2294 mm)
52
1
/
4
"
(1328 mm)
90
5
/
16
"
(2294 mm)
38
21
/
32
"
(982 mm)
1"
(26 mm)
49
27
/
32
"
(1277 mm)
