CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
STEP 5: Console Rack Cable Connections:
a
) Connect the
COAX
,
AUXPS
,
COMM
and
I/O
cables coming from
the right pedestal to the
corresponding wires in the console
rack.
NOTE
: All four connections are made
for any Console model.
STEP 6: Handrail Installation:
a
) Insert Handrails (E, F) onto
Pedestals and secure with 4 Bolts -M8
x 80mm (c) and Internal Tooth
Washer M8 (d) using 5 mm Hex Key.
Required Hardware:
4 M8 x 80mm bolts (c)
4 Internal Tooth M8 Washers (d)
STEP 7: Top Shoulder Covers:
a. Using a Phillips screwdriver, install
Shoulder Cover Top pieces Left (G)
and Right (H) with three Screws M4 x
10mm (c) on each side as shown.
CAUTION
: Make sure cabling is
NOT pinched during installation.
Required Hardware:
Qty. 6 M4 x 10mm screws(c)
Truefitness.com / 800.426.6570 / 636.272.7100
15
Summary of Contents for TC400
Page 10: ...CHAPTER 1 SAFETY INSTRUCTIONS Truefitness com 800 426 6570 636 272 7100 6 ...
Page 39: ...CHAPTER 6 ADDITIONAL INFORMATION WIRING DIAGRAMS Truefitness com 800 426 6570 636 272 7100 35 ...
Page 40: ...CHAPTER 6 ADDITIONAL INFORMATION WIRING DIAGRAMS Truefitness com 800 426 6570 636 272 7100 36 ...
