Assembly Instructions
4
TOOL REQUIREMENTS
o
Hex Key
– 5mm, T-Spanner-8 mm, Wrench 17mm (included with
hardware kit)
o
7/16 Open End Wrench (not included)
o
Long Nose Pliers (not included)
o
#2 Phillips Screwdriver (not included)
FRAME ASSEMBLY PROCEDURE
CAUTION:
Use caution when assembling treadmill. Unpacking and assembling of
this treadmill is a two person task.
NOTE: Remove treadmill components from packaging.
1. REMOVE MOTOR COVER
a. Remove two screws and two Motor Decoration Covers from Frame.
b.
Remove seven screws and Motor Cover from Frame
Fig. 1
