background image

True Fitness Technology  •  O’Fallon, MO  •  Phone: 800-426-6570/636-272-7100  •  Truefitness.com

Page # 32 of 34

CHAPTER 5:  ADDITIONAL INFORMATION

Strength 

Fuse XL-1800

All TRUE® Fitness products are distributed by TRUE and are 

warranted to the original registered product purchaser and the 

parts of the TRUE product (the “Product”) listed below, under 

normal use and service, shall be free of manufacturing defects 

in workmanship and materials only for the period of time 

beginning from the original date of purchase set forth below: 

Frame*

10 Years

Parts

Bearings, Bushings, and Weight Plates

Guide Rods and Pulleys

Cables and Belts

Cosmetics, Coatings, Grips, and Upholstery

5 Years

5 Years

1 Year

3 Months

Labor

Frame

Bearings, Bushings, Weight Plates

Guide Rods and Pulleys

Cables and Belts

Cosmetics, Coatings, Grips, and Upholstery

1 Year

1 Year

1 Year

1 Year

3 Months

NOTE:  Warranty valid for USA and Canada only. 

NOTE:  Failure to register this product will result in no 

servicing or authorization of parts to be shipped.

NOTE:  Buying after-market products from a 3rd party will 

result in voided warranty.

NOTE: This product is intended for Commercial use. If this 

product will not be used in this particular setting, please 

contact TRUE as is warranty is void.

Frame: The frame is warranted for defects in material and 

workmanship for a 10 years.  The frame is warranted for labor 

and freight (for parts shipped from TRUE) for one year from 

date of purchase. * This limited warranty on structural frame 

does not include paint or coatings.

Parts: The Fuse Strength Line’s mechanical parts are warranted 

for defects in material and workmanship for five years with 

one year labor warranty. Cables and belts are warranted for 

defects in material and workmanship for one year with one 

year labor warranty.This limited warranty does not cover 

damage or equipment failure resulting from or caused by 

improper assembly/installation, failure to follow instructions 

and warnings in owner’s manual, accident, misuse, abuse, 

unauthorized modification, or failure to provide reasonable 

and necessary maintenance. 

Cosmetics: The Fuse Strength Line cosmetic parts, coatings, 

grips and upholstery are warranted for defects in material 

and workmanship for three months with labor warranty to 

match the parts warranty period.  This limited warranty does 

not cover damage or equipment failure resulting from or 

caused by improper assembly/installation, failure to follow 

instructions and warnings in owner’s manual, accident, 

misuse, abuse, unauthorized modification, or failure to provide 

reasonable and necessary maintenance. This limited warranty 

will apply to, but may not be limited to, plastic covers, shrouds, 

caps, badges, overlays, paint, coatings, soft step inserts, and 

grips. 

Labor: Labor is covered for a period of one year from the 

date of purchase unless otherwise expressed within this 

limited warranty as long as a TRUE authorized service provider 

performs the service. Service that requires over 50 miles of 

travel may be subject to additional charges. Reasonable and 

necessary maintenance guidelines can be found in the owner’s 

manual.

Claims Procedure: TRUE Limited Warranty service may be 

obtained by contacting the authorized TRUE dealer from 

whom the Product was purchased.  If the dealer from whom 

the Product was purchased is no longer an authorized TRUE 

dealer, then TRUE Limited Warranty service may be obtained 

by contacting TRUE directly using the following contact 

information:

TRUE Fitness, Service Department

865 Hoff Road, St. Louis, MO 63366

1.800.883.8783

Hours of operation 8:30am - 5:00 pm CST

Save Time and Register Online!

Activate Multiple Warranties at truefitness.com

Summary of Contents for Fuse XL-1800



































Reviews: