CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
15 of 50
ASSEMBLY STEPS:
a) Slide one rubber gasket and one
Handlebar Base Cover onto each Heart
Rate Handlebar.
b) Connect the cables coming from
the base of each handlebar to the
corresponding cable coming from the
pedestal upright.
c) Slide each Heart Rate Handlebar into
the corresponding tube on the pedestal
upright.
d) Secure each handlebar with four
bolts and four washers.
Hardware Required:
8 M8xP1.25x12mm Bolts
8 Internal Tooth
Star Washer M8
2 Gasket
Step 3 Console Rack & Secure Pedestals:
Step 4 Heart Rate Handlebars:
a) Install Console Rack onto Pedestal
Uprights by resting Console Rack
tubing on top of pedestal tubing cradles.
Do not pinch cabling!
b) Install, but do not tighten, eight bolts
and 8 external tooth washers through
pedestal tubing cradle and into Console
Rack. Once all eight bolts are installed,
tighten them.
c) Secure Console Rack top with 2
screws and 2 washers
d) Tighten the 8 bolts from step 2.
Hardware Required:
8 M8 External Tooth Washers
2 M5 Washers
8 5/16” UNF x 28 mm Bolts
2 M5 x P0.8 x 10 Screws
NOTE: Handlebar Base Covers
are marked “L” for left and “R”
for right.