11052019
14
Your new stand is equipped with two (2) standing/seating platform ratchet straps.
These standing/seating platform ratchet straps are designed to stabilize your SC-1
treestand. They must be connected at all times when at hunting height. Once you
have reached your desired hunting height, these ratchet straps must be connected
and ratcheted tightly.
STEP 1: To install, once you have reached your desired hunting height, engage
the standing platform and seating platform ratchet straps by engaging the hook
portion of the ratchet straps with the receiver holes located on the toothed portion
of the v-brace as shown in Figure 26.
WARNING! Standing and seating platform ratchet straps have been included to help stabilize
the TNT SC-1 self-climber treestand, by
True North Treestands Inc.
They must be installed and tight after reaching hunting height! Failure to follow these instructions may
result in serious or death!
WARNING! You must disengage the standing and seating platform ratchet straps prior to attempting to climb down. Failure to follow
these instructions may result in serious or death!
STEP 2: Ratchet the straps tight as shown in Figure 27. Refer to Figure 28 for ratchet strap threading directions.
Figure 26
Install Hook Onto Receiver
Figure 27
Ratchet Tight
SC-1 STANDING/SEATING PLATFORM RATCHET STRAPS
Figure 29
Remove Diagonal Support
Nuts
Figure 31
Nest Standing Platform and Seat-
ing Platform Together
SC-1 FOLDING/CARRYING
Figure 30
Fold Diagonal Supports
Down
1
4
2
3
Figure 28
Ratchet Strap Threading
STEP 1: Remove the two (2) diagonal support nuts as shown in Figure 29. Fold the diagonal supports flat on both the standing and seating platforms
as shown in Figure 30.
STEP 2: Nest the standing and seating platforms together as shown in Figure 31. Using the seating and standing platform ratchet straps, ratchet the
two platforms together as shown in Figure 32.
Figure 32
Ratchet Platforms
Together
