True Manufacturing Company TMW TMW-36F Installation Manual Download Page 4

............ www.truemfg.com ............

True Food Service Equipment, Inc.

2

2

SAFETY INFORMATION

HOW TO SAFELY DISPOSE OF USED 
REFRIGERATION EQUIPMENT

DANGER!

 

RISK OF CHILD ENTRAPMENT

Child entrapment and suffocation are not problems of  
the past.  Junked or abandoned display cases are still 
dangerous… even if  they will sit for “just a few days.”  

It is much safer if doors and lids are removed so 
children cannot get trapped inside, leaving the shelves 
in place will also deter children from trying to climb 
inside.

If  you are getting rid of  your old refrigerator, please 
follow the instructions below to help prevent accidents.  
Depending on the country where the unit is located there 
will be officially approved ways of  disposing of  your 
used equipment.

It is important that care is taken in disposing of used 
refrigerators or freezers.  Before You Throw Away Your 
Old Refrigerator or Freezer:

  Take off the doors.

  Leave the shelves in place so that children may not 

easily climb inside.

Refrigerant Disposal

Depending on the Country where the unit is located 
there will be Officially approved ways of  disposing of  
your used equipment.  Your old refrigerator may have a 
cooling system that uses “Ozone Depleting ” chemicals. 
If  you are throwing away your old refrigerator, make 
sure the refrigerant is removed for proper disposal 
by a qualified service technician. If  you intentionally 
release any refrigerants you can be subject to fines and 
imprisonment under provisions of  the environmental 
regulations.

Summary of Contents for TMW TMW-36F














Reviews: