True Manufacturing Company TMW TMW-36F Installation Manual Download Page 1

............ www.truemfg.com ............

INSTALLATION MANUAL FOR MEAT WELL MODELS

TMW (TRUE MEAT WELL) 

 

CONGRATULATIONS!   

You have just purchased the finest commercial 

refrigeration available.  You can expect many years 

of trouble-free operation.

TRUE FOOD SERVICE EQUIPMENT, INC.

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366

(636)-240-2400 • FAX (636)272-2408 • INT’L FAX (636)272-7546 • (800)325-6152

Parts Department (800)424-TRUE • Parts Department FAX# (636)272-9471

TABLE OF CONTENTS

Safety Information

Safety Precautions    –––––––––––––––––––––––  1
Proper Disposal –––––––––––––––––––––––––––  2
Connecting Electricity  ––––––––––––––––––––––  3
Adapter Plugs    –––––––––––––––––––––––––––  3

Installation / Operation Instructions

Ownership –––––––––––––––––––––––––––––––  4
Required Tools   –––––––––––––––––––––––––––  4
Uncrating & Locating  ––––––––––––––––––––––  4
Installation of Castors ––––––––––––––––––––––  5 
Leveling Cabinet  ––––––––––––––––––––––––––  6
Electrical Instructions  ––––––––––––––––––––––  6
Start-up   ––––––––––––––––––––––––––––––––  7

Maintenance, Care & Cleaning

Cleaning Condenser Coil  ––––––––––––––––––––  8
Temperature Control Adjustment  –––––––––––––  9
Stainless Steel Equipment Care & Cleaning  ––  10-11

TMW-36F

TMW-36F-QT

#912634

Summary of Contents for TMW TMW-36F














Reviews: