16
TRUE
tmw
www
.
truemfg
.
com
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be
followed, including the following:
TOOLS REQUIRED
STEP 1 –
Disconnect power to unit.
STEP 2 –
Remove the front grill by backing out four phillips head
screws. (See image 3).
STEP 3 –
Remove bolts anchoring compressor assembly to frame
rails and carefully slide out. (tube connections are flexible)
STEP 4 –
Clean off accumulated dirt from the condenser coil and
the fan with a stiff bristle brush. (See image 1).
STEP 5 –
Lift cardboard cover above fan at plastic plugs and
carefully clean condenser coil and fan blades.
STEP 6 –
After brushing condenser coil vacuum dirt from coil, and
interior floor. (See image 2)
STEP 7 –
Replace cardboard cover. Carefully slide compressor
assembly back into position and replace bolts.
STEP 8 –
Reinstall rear grill assembly onto unit. Tighten all screws.
STEP 9 –
Connect unit to power and check to see if condensing
unit is running.
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
• Air Tank or CO2 Tank
• Vacuum Cleaner
MAINTENANCE, CARE, CLEANING
GLASS CHILLER
Image 1
Image 2
Image 3
Condenser Coil
