True Manufacturing Company TAC-14GS-HC-LD, Installation Manual

Page: 12 / 24

TEC_TM_086 REV. B | EN 09/26/22 Page 12 of 24
AIR CURTAIN www.truemfg.com
Cabinet Setup
WARNING!
– DO NOT use pliers or any crimping
tools when installing shelf clips. Altering shelf clips
in any way can lead to shelving instability.
Wire Shelving Installation
Procedure
1.
Hook the shelf clips into the shelf standards. See fig. 6.
2.
Push up on the bottom of the clip. See fig. 7.
NOTE: You may need to squeeze or twist the bottom of the
shelf clip for proper installation. Position all four shelf clips
equal in distance from the floor for flat shelves.
3.
Ensure the shelf clip is not loose or able to wiggle out of the
shelf standard. See figs. 8 and 9.
4.
Place the shelves on the shelf clips with the cross support bars
facing down.
NOTE: Be sure all shelf corners are properly seated.
Installation Tips
• Install all the shelf clips before installing any shelves.
• Start at the bottom shelf and work your way up.
• Always lay the back of each shelf down on the rear clips before
the front.
Fig. 6.
Installing top tab of shelf clip.
Fig. 7.
The bottom tab of the shelf clip
will fit tightly.
Fig. 8. You may need to squeeze or twist
the bottom of the shelf clip to install.
Fig. 9. Installed shelf clip.
Shelf
Clip
Shelf
Shelf
Shelf
Standards