True Blue Power
2
Revision 1, June 15, 2018
SECTION 1 GENERAL DESCRIPTION
1.1
INTRODUCTION
The USBT102 Series Dual USB Charging Port is a power accessory that converts 10 to 32 volts of DC
electrical input from a power supply to standard 5V power for any electronic product that charges using a
USB connector. The USBT102 provides two Universal Serial Bus-A (USB-A) ports and can be rear
mounted or front mounted in a variety of locations throughout a vehicle. The unit has been rigorously
tested, providing confidence and convenience to be mounted in either the cabin or cockpit.
This Dual USB Charging Port is designed as a DCP (Dedicated Charging Port) to industry-standard
protocol per the
USB Battery Charging 1.2 Compliance Plan
. Early-generation or smaller consumer
electronics typically accept one (1.0) amp of power during charging. However, newer electronics, such as
the Apple iPad
®
, other tablets and larger devices can accept and, in some cases, require up to 2.1 amps
of power to charge and operate. As a high power DCP, the USBT102 can provide up to 2.1 amps of
power to charge any USB device, including the higher demand products. Unlike most dual USB chargers
which provide one (1.0) amp on one port and 2.1 amps on the second port, the USBT102 can provide 2.1
amps of power to both ports simultaneously. With features like short circuit protection, over-current
protection, low voltage shut-down and temperature monitoring, it can handle unforeseen conditions safely.
Small, compact and powerful, with plenty of installation flexibility, the USBT102 is an ideal choice when
selecting a highly useful and effective addition to any vehicle.
1.2
TECHNICAL SPECIFICATIONS
1.2.1 Electrical Attributes
Input Voltage:
10-32 VDC
Input Power:
24 watts max; 1.7 amps @ 14 VDC / 0.85 amps @ 28 VDC
Output Voltage:
5 VDC ±0.25 per port
Output Power:
2.1 amps max per port
Efficiency:
~85% nominal
Table 1.1
1.2.2 Physical Attributes
Weight:
0.13 pounds
Dimensions: (not including connector) 1.50 inches wide X 1.50 inches high X 0.96 inches deep
Charging Ports Type:
USB Standard-A
Mounting:
Panel mount; rear or front
Table 1.2
1.2.3 Configurations
Part Number
Power Input
USB Connector
M6430102-1
Rear
Sealed
M6430102-2
Bottom
Sealed
M6430102-3
Rear
Lighted
M6430102-4
Bottom
Lighted
Table 1.3
