23
9. When the TLT material for laser techniques is not being used or is not
needed please ensure that is it kept in the air tight container. The
material can dry out rapidly if not stored correctly. We also advise not
ordering/delivering the vocal cord inserts until a day or two before
you’re intended purpose based on this fact. Your warranty will be
affected if the TLT inserts have found to be stored incorrectly.
10. To insert the vocal cords peel back the neck skin, remove the larynx
cover and in the space provided in the larynx place the appropriate
vocal cords. Ensuring that the lower location point lines up with the
location hole in the larynx. Re-attach the larynx cover and secure the
neck skin into please at all the Velcro locations.
11. Full care is needed when using the laser on the model and that only
the vocal cord area with the TLT material is used for ablation.
12.
Using Trucorp’s silicone lubricant ensure that the internal airway and
Nasal passage is well lubricated if used for airway management. (If
applicable)
13. Ensure that all airway devices are prepared to the manufactures
recommendations and instructions. Before insertion of the device
generous amounts of lubricant should be used to cover the surfaces in
contact with the AirSim airway.
14. Please ensure that the AirSim airway is cleaned after use. Please use
warm water of a dilute (8-10% w/w) Sodium Bicarbonate solution until
all visible foreign matter and residue is removed.
15. The head and neck skin of the AirSim Advance Larynx is made from
durable and very elastic polyurethane material. It can be cleaned using
a lightly soaped, damp cloth. Please do not use and detergents or
cleaning agents on the skin material
16. Please replace the AirSim Advance Larynx unit back into the carrier
case and store in clean, dry conditions away from heat and light; avoid
contact with metals, solvents, oils or greases and storing detergents
