TruckCraft Corporation
5751 Molly Pitcher Hwy South
Chambersburg, PA 17202
TC-265 Service Bodies
Tel. (800) 755-3867
Fax. (717) 375-2975
E-Mail:
Web: www.truckcraft.com
Copyright 2018 TruckCraft Corporation Revised 02/2018 Page 7
Service Body Options
The
TC-265
was designed to give the customer a wide range of body options for the
DRW Cab
Chassis
with a
60CA
and with a weight of
896
lbs. The three main body
configurations are,
A/B, A/A & BB
bodies which will give the customer many options to meet
his needs. All the service bodies are made of 100% aluminum and the floor is made with
6061-
T6
extruded planks for maximum strength & rigidity. With the Standard
(A/B)
configuration
there is
38.3 cu.ft.
of secure storage per side and a floor space of
49” W x 107” L. All
service
bodies come with a
1/8”
diamond plate cabinet top standard but a smooth top is also available.
All compartments have a standard double panel all aluminum door which is powder-
coated white and
6
shelves with dividers are included. We can also delete powder coating
supply to the customer a color match to their vehicle at an additional cost. Each vertical door
has a gas spring and the horizontal doors are supplied with detachable cables. All the
compartment door will have an Black & Chrome whale-tail twist lock latch with roller &
compression action that will seal against an automotive D-style bulb style seal. Attached at the
rear is one hand top drop & slam-shut tailgate that can be removed if necessary. A set of
wheel-well panels will be supplied to match whatever the configuration of fuel fill is needed. A
set fender flares will also be attached for additional protection of road spray.
There are two all-aluminum bumper styles which is an
8“
bumper & a
11”
V-Notch style
with
1/8”
aluminum diamond plate on both. We also supply a Keyless Entry W/LED strip
lighting for all the body configurations. Shown below are the three body configurations.
Listed below is the three body configurations,
A/B (D1-07599), A/A (D1-07975)
&
B/B (D1-07976)
.
