TruckCraft Corporation
5751 Molly Pitcher Hwy South
Chambersburg, PA 17202
TC-265 Service Bodies
Tel. (800) 755-3867
Fax. (717) 375-2975
E-Mail:
Web: www.truckcraft.com
Copyright 2018 TruckCraft Corporation Revised 02/2018 Page 33
General Maintenance Instructions
ALWAYS
wash your service body after any after major storm in the winter months to remove
the road chemicals and salt. This will help in keeping your unit from being stained. If possible,
a good wax should be used on your service body to help keep it looking good and protect the
aluminum finish.
ALWAYS l
ubricate hinges and rotating parts with a light machine oil at least once a year. This
will insure they will work properly.
ALWAYS
check the powder coated doors to see if they were damaged or chipped. If they
were, it is recommended to repair these areas to prevent corrosion from lifting the painted or
powder coated parts.
ALWAYS
check the door seals to ensure that they have not been damaged and are still
adhered to box for a water tight seal. To clean them wipe them down with mild soapy water
and dry them off. If the seal has detached itself from the box you will need to reattach it with a
3M double sided tape or replace with a new seal.
For units with Keyless Entry,
NEVER
leave off the electrical cover for units with Keyless Entry,
located on the passenger side front compartment and each door lock cover. Check to make
sure that electrical connectors are still tight.
ALWAYS
check the rotary latches to make sure that they are working correctly. At least every
4 to 6 months you should check and see if they need lubrication to the moving parts. The
doors can be made tighter or looser against the seal be adjusting the roller on the latch.
Loosen the bolt holding the roller and move it in or out for proper fit and retighten it.
