D301144 0509
Installation PB-XEPI
13
Connecting the power supply
Fig. 3: Terminal strip for power supply on the device
1.
Connect the cable of a 24 V power supply and the earth conductor (earth terminal)
to the terminal strip on the device. The terminal strip can be plugged and lifted out
using a screwdriver for installation.
2.
Switch on the power supply. The LED RUN flashes green until the device's
initiation procedure is completed. Afterwards the LED RUN lights green.
Danger
Electrical voltage.
Only a qualified electrician is allowed to work on the device's electrical
equipment.
Incorrect device earthing can cause injury to personnel or device damage.
Ensure correct and proper earthing of the device.
Warning
Reverse polarity in the power supply can damage the device. Make sure the
power supply is connected with correct polarity.
+24 V
not assigned
0 V
Earth conductor
Connecting the power supply
