Installation PB-XEPI
D301144 0509
12
Assembling and disassembling the device
Fig. 2: Assembly and disassembly of the device
Assembling the device
1.
Place the notch of the device on the DIN rail and move the device downward until
the stop lever locks into place on the DIN rail.
Disassembling the device
1.
Disassemble the connected supply and signal lines (Ethernet, PROFIBUS,
voltage).
2.
Place the screwdriver into the stop lever on the device (see Fig. 2, [3]).
3.
Press the screwdriver in the direction of the device and simultaneously swing the
device off the DIN rail.
Connecting the Ethernet
1.
Insert the patch cable plug (RJ45, not included in the scope of delivery) into the
Ethernet socket on the device until the plug locks into place.
2.
The green LED on the Ethernet socket lights as soon as the device is energized
and an Ethernet network is available.
Warning
Warning of damage to device. Above and below the device, a minimum of
5 cm head space for heat dissipation needs to be available.
1 Device with notch on DIN rail
2 DIN rail
3 Device on DIN rail
4 Stop lever
[1]
[3]
[2]
[4]
Assembling and disassembling the device
