-
- CORRECT METHOD
CORRECT METHOD
Of How To Open Cover To The Front.
Of How To Open Cover To The Front.
IMPORTANT OPERATING TIPS CONTINUED:
Cover Tracking Marks:
The cover will experience slight tracking marks from dust deposited on the top surface
even after the first initial roll out. If there is a heavy deposit of dust, simply use a wet rag to wipe the
top surface of the cover clean.
Cover Tracking Mark Prevention:
All truck beds will accumulate road dust. This dust will accumulate on the side
rails and adhere to the underside of the truck cover. When the truck cover is rolled open, the underside
of the cover can deposit dust onto the top surface. To prevent dust-tracking marks, periodically clean
the side rail surfaces, rubber slat end caps, and underside surface of the cover to remove dust build
up. Plugging air holes and gaps in the truck box construction will also greatly reduce dust intrusion
into the truck box. Periodically cleaning the top surface with soap and water will also help prevent
dust-tracking marks.
-
After Initial Install
- Day to Day Use
-
- INCORRECT METHOD
INCORRECT METHOD
Of How To Open Cover To The Front.
Of How To Open Cover To The Front.
- Do not slide a partially opened cover across the cover's surface.
Do not slide a partially opened cover across the cover's surface.
- Do not slide cargo across the cover's surface.
Do not slide cargo across the cover's surface.
-
Do not store items on cover's surface.
Do not store items on cover's surface.
-
When placing the rolled up cover assembly on the side rails and installing it to the side rails
(see step 19) the weight of the cover assembly may tilt or flex the rails downward. Simply push up
on the rail when securing the header guides to the rail (see step 20).
-
After the initial installation leave cover closed and latched for a 24 hour period. This will insure that
After the initial installation leave cover closed and latched for a 24 hour period. This will insure that
the fabric has taken a complete set to the metal substrate.
the fabric has taken a complete set to the metal substrate.
TruXedo Inc.
•
2209 Kellen Gross Drive, Yankton, SD 57078
•
877-878-9336
•
truxedo.com
©
TruXedo Inc. 2020
Page 9
