B
B
NOTE:
If you have a key
lock tailgate, truck bed
cover is secured until
tailgate is unlocked and
opened.
NOTE:
Secure hook fastener and loop fastener along entire length of both side
rails before driving vehicle. This will prevent wind lifting the cover and causing
damage.
Latch Both Sides.
CLICK!
To open cover, pull down on
To open cover, pull down on
release cable and hold down.
release cable and hold down.
Lift and roll rear header.
Lift and roll rear header.
CLICK!
After the initial installation leave cover closed and latched for a 24 hour period. This will
After the initial installation leave cover closed and latched for a 24 hour period. This will
ensure that the fabric has taken a complete set to the metal substrate.
ensure that the fabric has taken a complete set to the metal substrate.
ATTENTION!
ATTENTION!
Make sure cover is securely latched on
both sides before operating vehicle.
ALTERNATIVE METHOD OF CLOSING COVER:
Close and latch
cover, then close tailgate with the seal to the inside of the tailgate. Some
care will need to be taken to train seal to be closed on the inside.
Secure Hook and Loop down both sides along entire length of
cover system.
PREFERRED METHOD OF CLOSURE: Close tailgate, then
close cover on top of tailgate. This method will not work with some
truck applications. Use alternate method instead.
CLOSING THE COVER CONT:
OPENING THE COVER:
SETTING HOOK AND LOOP FASTENER:
11
12
13
14
Page 5
TruXedo Inc.
•
2209 Kellen Gross Drive, Yankton, SD 57078
•
877-878-9336
•
truxedo.com
©
TruXedo Inc. 2020
