![background image](http://html.mh-extra.com/html/truaudio/d16/d16_user-manual_1173889010.webp)
9
•
•
•
•
•
•
•
(2a) Adding multiple IC-SUB 8 subwoofers
Attach your source to the “line in” or “bus in”
Set the input switch to the appropriate source
Set the speaker zone to “ST” Stereo
Attach the speaker wires for your speakers
From the first zone attach a single RCA to dual
RCA cable from the “SUB OUT” for that zone to
the next zone “line in” LEFT & RIGHT channel.
Next set that subwoofer zone to “ST” Stereo and
attach each subwoofer wires to the phoenix
connector.(left and right)
Now play music and adjust the crossover and the
gain knobs on both zones till you get the music
sounding the way you like. Use your source
volume to increase and decrease the sound.
This configuration of 2 subwoofers will not be any
louder than 1 subwoofer but it will enable you to
spread out the bass more evenly in a large room.
(3) Output a subwoofer signal over speaker wire to (TWO) TruAudio IC-SUB 8
from a single zone.
SOURCE
NOTE:
The subwoofer channel MUST BE
switched to “ST” position, not “BR” (in this
example).
SPEAKERS
SUBWOOFERS
SPEAKERS
SUBWOOFERS
(Diagram shows input set to “line in”)