Troy Lee Designs A2, Owner'S Manual

Page: 19 / 63

EN
WARNING
A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of
wear. Bicycle helmets are constructed of materials that deteriorate with age so their protective
capabilities may lessen over time. This helmet should be replaced within 5 years of the date of
manufacture stamped in this helmet regardless of use or condition.
Never take unnecessary risks simply because you are wearing a helmet or fail to do what you
can to avoid accidents, such as failing to keep your bicycle in good operating condition.
Never fail to use good judgment while riding or fail to follow all traffic rules and regulations for
on road riding as well as the IMBA.com “Rules of the Trail” for off road riding.
Read owners manual before using this helmet. If you do not have an owner’s manual, visit
www.troyleedesigns.com/company/safety or call 951-371-5219 / toll free 800-239-6566.
STORING YOUR HELMET
After each use, allow the helmet to air dry and then store in a cool, dry place. It is best to hang
it from its straps. Do not hang it on your bike or handlebars or store it anywhere else where it
could be bumped or fall onto a hard surface as this could crack it or otherwise damage it.
WARNING! HEAT DAMAGE
Excessive heat can permanently damage the helmet. Direct sunlight, dark gear bags, and
automobile trunks can get hot enough to cause heat damage.
CLEANING
For cleaning, use a solution of liquid laundry soap (5% soap, 95% water). Pads can be removed
and washed separately and dried.
This helmet is intended for pedal cyclists (non-motorized), mountain bicycle riding, BMX
bicycle riding, and road bicycle riding only.