Make sure hinges are
mounted in the same line.
6
Pin hinge(24x24mm)
3mm
1mm
Elevator
Tailing
edge
Make sure they are in
the right position while
installing.
2
1
Steel wire (0.5x3000mm)
U-style wire (3mm)
4mm
1
Rib template (3mm ply)
2x7mm
2x7mm
4mm
4
Wood dowel (4x30mm)
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
1
Stab joiner (12x210mm)
Apply instant type CA glue to elevator and pin hinge.
Keep some space about 1mm width between
elevator and tailing edge.
Drill holes to appropriate position in the stabilizer and
epoxy it to the fuselage as below.
According to the rib templete drill holes to appropriate
position in the tail fuselage.
According to the rib templete drill holes one the
stabilizer root and epoxy wood dowel in them.
Set the U-style wire through the enlarged hole as below.
27
28
29
30
32
6
31
3mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Glue the elevator to the stabilizer by CA and epoxy.
3mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Glue the elevator to the stabilizer by CA and epoxy.
3mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Glue the elevator to the stabilizer by CA and epoxy.
4
Blind Nut (4mm)
1
Engine mount (68x105mm)
Linkage Stopper
4
4
12
4
Washer(4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
2
4
Screw (4x25mm)
2
Plastic tube (2x400mm)
Fuel tank (550cc)
1
In case of 2-cycle & 4-cycle engine.
The front view of the engine installation finished.
158 mm
The side sketch map of the engine installation finished.
Washer (4x8mm)
Washer (4x8mm)
Washer (4x8mm)
Screw (4x35mm)
Screw (4x25mm)
Nut (4mm)
Spring Washer (4mm)
4mm
Install the engine carefully.
Drill 4 holes and set blind nut in appropriate position
in the firewall before install the engine.
5.2mm
Blind Nut
Blind Nut (4mm) 4
34
35
36
37
33
7
Accessory list for the coming installation steps.
