TP Screw (2.3x12mm)
C"
C = C"
C
side wing
centre wing
4mm
2
Wood dowel (4x30mm)
1
Rib template (3mm ply)
Main wing joiner
1
330mm
219mm
4mm
The sketch maps when the retract up and down.
Epoxy the gear house to the relevant position.
Assemble the retracts to the appropriate position
in the gear house.
Epoxy the PVC decoration parts to the appropriate
position on the wing as illustration.
According to the rib template drill holes to one wing
root and epoxy wood dowel in them.
According to the rib template drill holes to anther wing
root and connect the wings with main wing joiner.
17
18
20
21
4
16
19
2
Plastical tube(3x50mm)
1
Nose arm(3mm)
Collar (3mm)
2
1
1
Tail landing gear(3mm)
Tail wheel (45mm)
1
Retainer
Rod (2X257mm) 1
TP Screw(3x20mm)
Washer (3x6mm)
4
4
2
Steel wire (0.5x1200mm)
3
2
2
Clevis
Washer(3x15mm)
Lock Nut (3mm )
1
Screw (3x65mm)
2
Copper joiner
Collar
Tail landing gear
Collar
Collar
2.5mm
3
Pin hinge(2.5x48mm)
Make sure hinges are
mounted in the same line.
42mm
84mm
80mm
Ply (6mm)
1.8mm
TP Screw(3x20mm)
Washer (3x6mm)
4
4
Ply (3mm)
2
suggest drilling a hole here for
assembling wheel steeling
mount
25mm
3
Pin hinge(2.5x48mm)
The sketch map when tail wheel assemble completion.
Drill holes to appropriate position in the rudder and epoxy
the ping hinges in them
1mm
Rudder
Tailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Keep some space about 1mm width between
the tailing edge and the rudder.
The sketch map when assemble the tail landing
gear to the wheel steeling mount.
The sketch map of assembling the wheel steeling
mount to appropriate position in the fuselage.
44
45
46
47
9
48
Accessory list for the coming installation steps.
