2
Plastical tube(3x50mm)
1
Nose arm(3mm)
Collar (3mm)
3
1
1
Tail landing gear(3mm)
Tail wheel (45mm)
1
Retainer
Rod (2X300mm)
1
TP Screw(3x20mm)
Washer (3x6mm)
4
4
2
Steel wire (0.5x1200mm)
3
2
2
Clevis
Washer(3x15mm)
Lock Nut (3mm )
1
Screw (3x65mm)
2
Copper joiner
3
Pin hinge(2.5x48mm)
8
TP Screw (2.3x8mm)
Ply (15x15x3mm)
8
Fuel supply line
Fuel spray line
Air pressure line
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Set screw (3x4mm)
Washer (2mm)
Set screw (3x4mm)
1
1
1
1
Note: Customers can choose nylon stabbing fix the tank,
We don’t suppty nylon stabbing.
Mount the fuel tank to the fuselage.
Install the servo.
Assemble the throttle servo to appropriate
position in the fuselage.
Assembly of the fuel tank.
Engine installation finished sketch map.
39
42
41
8
Accessory list for the coming installation steps.
40
38
Collar
Tail landing gear
Collar
Collar
3
Pin hinge(2.5x48mm)
Make sure hinges are
mounted in the same line.
15mm
45mm
1.8mm
40mm
suggest drilling a hole here for
assembling wheel steeling
mount
TP Screw(3x20mm)
Washer (3x6mm)
4
4
2
Plastical tube(3x50mm)
34mm
80mm
90mm
2.5mm
1mm
Rudder
Tailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
40mm
10mm
The sketch map when assemble the tail landing
gear to the wheel steeling mount.
The sketch map of assembling the wheel steeling
mount to appropriate position in the fuselage.
The sketch map when tail wheel assemble completion.
Drill a small hole to appropriate possition in the
fuselage for installing the plastical tube.
Drill holes to appropriate position in the rudder and epoxy
the ping hinges in them
Keep some space about 1mm width between
the tailing edge and the rudder.
44
45
46
47
9
48
Accessory list for the coming installation steps.
43
