background image

MANUFACTURER’S LIMITED WARRANTY FOR:

The limited warranty set forth below is given by Troy-Bilt LLC 
with respect to new merchandise purchased and used in the 
United States, its possessions and territories.

Troy-Bilt LLC warrants this product against defects for a 
period of two (2) years commencing on the date of original 
purchase and will, at its option, repair or replace, free of 
charge, any part found to be defective in materials or 
workmanship. This limited warranty shall only apply if this 
product has been operated and maintained in accordance 
with the Operator’s Manual furnished with the product, and 
has not been subject to misuse, abuse, commercial use, 
neglect, accident, improper maintenance, alteration, 
vandalism, theft, fire, water, or damage because of other peril 
or natural disaster. Damage resulting from the installation or 
use of any accessory or attachment not approved by Troy-Bilt 
LLC for use with the product(s) covered by this manual will 
void your warranty as to any resulting damage.

Normal wear parts or components thereof are subject to 
separate terms as follows:

 

All normal wear parts or 

component failures will be covered on the product for a period 
of 90 days regardless of cause. After 90 days, but within the 
two year period, normal wear part failures will be covered 
ONLY IF caused by defects in materials or workmanship of 
OTHER component parts. Normal wear parts and 
components include, but are not limited to: batteries, belts, 
blades, blade adapters, grass bags, rider deck wheels, seats, 
snow thrower skid shoes, shave plates, auger spiral rubber, 
and tires.

HOW TO OBTAIN SERVICE:

 Warranty service is available, 

WITH PROOF OF PURCHASE, through your local authorized 
service dealer. To locate the dealer in your area, check your 
Yellow Pages, or contact Troy-Bilt LLC at P.O. Box 361131, 
Cleveland, Ohio 44136-0019, or call 1-866-840-6483 or 1-
330-558-7220, or log on to our Web site at www.troybilt.com.

This limited warranty does not provide coverage in the 
following cases:

a.

The engine or component parts thereof. These items 

carry a separate manufacturer’s warranty. Refer to 
applicable manufacturer’s warranty for terms and 
conditions.

b.

Log splitter pumps, valves, and cylinders have a 

separate one year warranty.

c.

Routine maintenance items such as lubricants, filters, 

blade sharpening, tune-ups, brake adjustments, clutch 
adjustments, deck adjustments, and normal 
deterioration of the exterior finish due to use or 
exposure.

d.

Troy-Bilt LLC does not extend any warranty for 

products sold or exported outside of the United States, 
its possessions and territories, except those sold 
through Troy-Bilt LAC’s authorized channels of export 
distribution.

e.

Parts that are not genuine Troy-Bilt parts are not 

covered by this warranty.

f.

Service completed by someone other than an 

authorized service dealer is not covered by this 
warranty.

g.

Transportation charges and service calls are not 

covered.

No implied warranty, including any implied warranty of 
merchantability of fitness for a particular purpose, 
applies after the applicable period of express written 
warranty above as to the parts as identified. No other 
express warranty, whether written or oral, except as 
mentioned above, given by any person or entity, 
including a dealer or retailer, with respect to any product, 
shall bind Troy-Bilt LLC. During the period of the 
warranty, the exclusive remedy is repair or replacement 
of the product as set forth above.

The provisions as set forth in this warranty provide the 
sole and exclusive remedy arising from the sale. Troy-Bilt 
LLC shall not be liable for incidental or consequential 
loss or damage including, without limitation, expenses 
incurred for substitute or replacement lawn care services 
or for rental expenses to temporarily replace a warranted 
product.

Some states do not allow the exclusion or limitation of 
incidental or consequential damages, or limitations on how 
long an implied warranty lasts, so the above exclusions or 
limitations may not apply to you.

In no event shall recovery of any kind be greater than the 
amount of the purchase price of the product sold. 

Alteration 

of safety features of the product shall void this warranty. 

You assume the risk and liability for loss, damage, or injury to 
you and your property and/or to others and their property 
arising out of the misuse or inability to use the product.

This limited warranty shall not extend to anyone other than the 
original purchaser or to the person for whom it was purchased 
as a gift.

HOW STATE LAW RELATES TO THIS WARRANTY:

 This 

limited warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

Troy-Bilt LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-866-840-6483, 1-330-558-7220

Summary of Contents for TRU CUT 100

















Reviews: