background image

2

Finding and Recording Model Number

Please do 

NOT return the unit to the retailer from which it was  

purchased, without first contacting Customer Support.

Table of Contents

BEFORE YOU START ASSEMBLING  
YOUR NEW EQUIPMENT, 
please locate the model plate on the equipment and copy the 
information to the sample model plate provided to the right. 
You can locate the model plate by standing at the operating 
position and looking down at the rear of the snow thrower. 
This information will be necessary to use the manufacturer’s 
web site and/or obtain assistance from the Customer Support 
Department or an authorized service dealer.

This Operator’s Manual is an important part of your new snow thrower. It will help you assemble,  

prepare and maintain the unit for best performance. Please read and understand what it says. 

Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this 
unit, you can seek help from the experts. Choose from the options below:
1.  Visit 

troybilt.com

. Click on the Service & Support menu option. 

2. Phone a 

Customer Support Representative

 at 1 (866) 840-6483.

3. The 

engine manufacturer

 is responsible for all engine-related issues with regards to performance, power-rating, specifica-

tions, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with 

your unit, for more information. 

 

    Safety Labels ........................................... p. 3
    Safe Operation Practices ....................... p. 4
    Setting Up Your Snow Thrower .............. p. 6
    Know Your Snow Thrower ...................... p. 7
    Operating Your Snow Thrower ............... p. 8
    Adjustments & Maintenance ................ p. 10

    Off-Season Storage .............................. p. 12
    Troubleshooting .................................... p. 13
    Parts List ............................................... p. 14
    Accessories & Kits ............................... p. 18
    Notes ...................................................... p. 19
    Warranty .................................... Back Cover

www.troybilt.com

TROY-BILT  LLC

P. O. BOX  361131

CLEVELAND, OH 44136

866-840-6483

330-558-7220

Summary of Contents for Squall 5521





















Reviews: