8
S
ection
3 — A
SSembly
& S
et
-U
p
4.
Place some of the white lithium grease provided on the
chute band as shown in Figure 3-4.
Figure 3-4
5.
Install the chute band as shown in Figure 3-5.
Figure 3-5
6.
With the discharge chute positioned to the right as shown,
install the chute band by lining up the notches in the front
with the band, and making certain to fit the discharge
chute inside the channel of the chute band, as detailed in
the inset of Figure 3-6.
Figure 3-6
7.
Secure the chute band to itself by first aligning the two
snap-fit features and pushing the two ends (1 & 2) together
as shown. Be sure both tabs on the two ends engage each
other, as shown in the top left inset of Figure 3-7. When
properly assembled, the chute band will appear as in the
top right inset of Figure 3-7.
1
2
Figure 3-7
IMPORTANT:
If you need to remove the chute for any reason,
a screw driver must be used to release the locking tabs shown
above in the left inset of Figure 3-7.
Summary of Contents for FLEX 23AABA6X711
Page 20: ...Notes 10 20 ...