![background image](http://html.mh-extra.com/html/troy-bilt/31ah9q77766/31ah9q77766_operators-manual_1173241016.webp)
16
6
Maintaining
Your Snow
Thrower
WARNING
Always stop engine,
disconnect spark
plug, and ground
against engine before
performing any type
of maintenance on
your machine.
IMPORTANT
Avoid oil spillage on rub-
ber friction wheel and
aluminum drive plate.
IMPORTANT
NEVER replace the
auger shear pins
with standard pins.
Any damage to the
auger gearbox or other
components, as a result
of doing so, will NOT be
covered by your snow
thrower’s warranty.
Figure 6-1
Figure 6-
Engine
Refer to the separate
Tecumseh
Engines manual
packed with your unit for all engine maintenance
instructions.
Lubrication
Engine
Refer to the separate
Tecumseh
Engines manual
packed with your unit for all engine lubrication
instructions.
Drive and Shifting Mechanism
At least once a season or after every 25 hours of opera-
tion, remove rear cover. Lubricate all chains, sprockets,
gears, bearings, shafts, and the shifting mechanism. Use
engine oil or a spray lubricant. Refer to Figure 6-1.
IMPORTANT
: Keep all grease and oil off the rubber
friction wheel and drive plate.
Wheels
At least once a season, remove all wheels. Clean and
coat the axles with a multipurpose automotive grease
before reinstalling wheels.
Chute Directional Control
Once a season, the spiral end on the chute directional
control should be greased with multipurpose automotive
grease.
Auger Shaft
At least once a season, remove the shear pins on auger
shaft. Spray lubricant inside shaft, around the spacers.
Also lubricate the flange bearings found at either end of
the shaft. See Figure 6-2.
Augers
The augers are secured to the spiral shaft with shear pins
and cotter pins. See Figure 6-2. If you hit a foreign object
or ice jam, the snow thrower is designed so that the pins
will shear.
1. If augers do not turn, check to see if pins have
sheared.
2. Replace the pins if needed. Two replacement shear
pins and cotter pins have been provided with the
snow thrower. Spray an oil lubricant into shaft before
inserting new pins and securing with new cotter pins.
Shear Pin
Cotter Pin
Spacer
Bearing
Summary of Contents for 31AH9Q77766
Page 31: ...31 NOTES ...